Iván Pérez
2017-12-16 09:20:43 UTC
Public bug reported:
As currently set up in Ubuntu 16.04, when an audio device connects via
bluetooth, it starts being used by programs automatically. However, the
sound applet still "points to" the previously selected audio output.
Therefore, changing the volume has no immediate audible effect.
The way to change that, currently, is to go to Sound settings, select
the bluetooth device as current output (again?), and then the volume
will change.
I would expect that, when a bluetooth device is connected, it starts
being used, *and* changing the volume immediately will affect the
bluetooth device.
I googled a bit, and people have suggested [1] that the file
/etc/pulse/default.pa should contain load-module module-switch-on-
connect before the volume is restored. My installation does not have
that line, but it does have:
### Should be after module-*-restore but before module-*-detect
load-module module-switch-on-port-available
According to [1], maybe this should be listed in that file *before* the
aforementioned module-*-restore lines.
[1] https://askubuntu.com/questions/233277/when-a-bluetooth-audio-
device-auto-connects-volume-settings-wont-work-until-i-m
** Affects: pulseaudio (Ubuntu)
Importance: Undecided
Status: New
** Description changed:
As currently setup in Ubuntu 16.04, when an audio device connects via
bluetooth, it starts being used by programs automatically. However, the
sound applet still "points to" the previously selected audio output.
Therefore, changing the volume has no immediate audible effect.
The way to change that, currently, is to go to Sound settings, select
the bluetooth device as current output (again?), and then the volume
will change.
I would expect that, when a bluetooth device is connected, it starts
being used *and* changing the volume immediately will affect the
bluetooth device.
I googled a bit, and people have suggested [1] that the file
/etc/pulse/default.pa should contain load-module module-switch-on-
connect before the volume is restored. My installation does not have
that line, but it does have:
### Should be after module-*-restore but before module-*-detect
load-module module-switch-on-port-available
+ According to [1], this should be listed in that file *before* the
+ aforementioned module-*-restore lines.
+
[1] https://askubuntu.com/questions/233277/when-a-bluetooth-audio-
device-auto-connects-volume-settings-wont-work-until-i-m
** Package changed: openal-soft (Ubuntu) => pulseaudio (Ubuntu)
** Description changed:
- As currently setup in Ubuntu 16.04, when an audio device connects via
+ As currently set up in Ubuntu 16.04, when an audio device connects via
bluetooth, it starts being used by programs automatically. However, the
sound applet still "points to" the previously selected audio output.
Therefore, changing the volume has no immediate audible effect.
The way to change that, currently, is to go to Sound settings, select
the bluetooth device as current output (again?), and then the volume
will change.
I would expect that, when a bluetooth device is connected, it starts
being used *and* changing the volume immediately will affect the
bluetooth device.
I googled a bit, and people have suggested [1] that the file
/etc/pulse/default.pa should contain load-module module-switch-on-
connect before the volume is restored. My installation does not have
that line, but it does have:
### Should be after module-*-restore but before module-*-detect
load-module module-switch-on-port-available
According to [1], this should be listed in that file *before* the
aforementioned module-*-restore lines.
[1] https://askubuntu.com/questions/233277/when-a-bluetooth-audio-
device-auto-connects-volume-settings-wont-work-until-i-m
** Description changed:
As currently set up in Ubuntu 16.04, when an audio device connects via
bluetooth, it starts being used by programs automatically. However, the
sound applet still "points to" the previously selected audio output.
Therefore, changing the volume has no immediate audible effect.
The way to change that, currently, is to go to Sound settings, select
the bluetooth device as current output (again?), and then the volume
will change.
I would expect that, when a bluetooth device is connected, it starts
- being used *and* changing the volume immediately will affect the
+ being used, *and* changing the volume immediately will affect the
bluetooth device.
I googled a bit, and people have suggested [1] that the file
/etc/pulse/default.pa should contain load-module module-switch-on-
connect before the volume is restored. My installation does not have
that line, but it does have:
### Should be after module-*-restore but before module-*-detect
load-module module-switch-on-port-available
According to [1], this should be listed in that file *before* the
aforementioned module-*-restore lines.
[1] https://askubuntu.com/questions/233277/when-a-bluetooth-audio-
device-auto-connects-volume-settings-wont-work-until-i-m
** Description changed:
As currently set up in Ubuntu 16.04, when an audio device connects via
bluetooth, it starts being used by programs automatically. However, the
sound applet still "points to" the previously selected audio output.
Therefore, changing the volume has no immediate audible effect.
The way to change that, currently, is to go to Sound settings, select
the bluetooth device as current output (again?), and then the volume
will change.
I would expect that, when a bluetooth device is connected, it starts
being used, *and* changing the volume immediately will affect the
bluetooth device.
I googled a bit, and people have suggested [1] that the file
/etc/pulse/default.pa should contain load-module module-switch-on-
connect before the volume is restored. My installation does not have
that line, but it does have:
### Should be after module-*-restore but before module-*-detect
load-module module-switch-on-port-available
- According to [1], this should be listed in that file *before* the
+ According to [1], maybe this should be listed in that file *before* the
aforementioned module-*-restore lines.
[1] https://askubuntu.com/questions/233277/when-a-bluetooth-audio-
device-auto-connects-volume-settings-wont-work-until-i-m
--
You received this bug notification because you are a member of
Debian/Ubuntu Games Team, which is subscribed to openal-soft in Ubuntu.
https://bugs.launchpad.net/bugs/1738528
Title:
Sound applet reflects volume of different device when bluetooth device
auto-connects
Status in pulseaudio package in Ubuntu:
New
Bug description:
As currently set up in Ubuntu 16.04, when an audio device connects via
bluetooth, it starts being used by programs automatically. However,
the sound applet still "points to" the previously selected audio
output. Therefore, changing the volume has no immediate audible
effect.
The way to change that, currently, is to go to Sound settings, select
the bluetooth device as current output (again?), and then the volume
will change.
I would expect that, when a bluetooth device is connected, it starts
being used, *and* changing the volume immediately will affect the
bluetooth device.
I googled a bit, and people have suggested [1] that the file
/etc/pulse/default.pa should contain load-module module-switch-on-
connect before the volume is restored. My installation does not have
that line, but it does have:
### Should be after module-*-restore but before module-*-detect
load-module module-switch-on-port-available
According to [1], maybe this should be listed in that file *before*
the aforementioned module-*-restore lines.
[1] https://askubuntu.com/questions/233277/when-a-bluetooth-audio-
device-auto-connects-volume-settings-wont-work-until-i-m
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1738528/+subscriptions
As currently set up in Ubuntu 16.04, when an audio device connects via
bluetooth, it starts being used by programs automatically. However, the
sound applet still "points to" the previously selected audio output.
Therefore, changing the volume has no immediate audible effect.
The way to change that, currently, is to go to Sound settings, select
the bluetooth device as current output (again?), and then the volume
will change.
I would expect that, when a bluetooth device is connected, it starts
being used, *and* changing the volume immediately will affect the
bluetooth device.
I googled a bit, and people have suggested [1] that the file
/etc/pulse/default.pa should contain load-module module-switch-on-
connect before the volume is restored. My installation does not have
that line, but it does have:
### Should be after module-*-restore but before module-*-detect
load-module module-switch-on-port-available
According to [1], maybe this should be listed in that file *before* the
aforementioned module-*-restore lines.
[1] https://askubuntu.com/questions/233277/when-a-bluetooth-audio-
device-auto-connects-volume-settings-wont-work-until-i-m
** Affects: pulseaudio (Ubuntu)
Importance: Undecided
Status: New
** Description changed:
As currently setup in Ubuntu 16.04, when an audio device connects via
bluetooth, it starts being used by programs automatically. However, the
sound applet still "points to" the previously selected audio output.
Therefore, changing the volume has no immediate audible effect.
The way to change that, currently, is to go to Sound settings, select
the bluetooth device as current output (again?), and then the volume
will change.
I would expect that, when a bluetooth device is connected, it starts
being used *and* changing the volume immediately will affect the
bluetooth device.
I googled a bit, and people have suggested [1] that the file
/etc/pulse/default.pa should contain load-module module-switch-on-
connect before the volume is restored. My installation does not have
that line, but it does have:
### Should be after module-*-restore but before module-*-detect
load-module module-switch-on-port-available
+ According to [1], this should be listed in that file *before* the
+ aforementioned module-*-restore lines.
+
[1] https://askubuntu.com/questions/233277/when-a-bluetooth-audio-
device-auto-connects-volume-settings-wont-work-until-i-m
** Package changed: openal-soft (Ubuntu) => pulseaudio (Ubuntu)
** Description changed:
- As currently setup in Ubuntu 16.04, when an audio device connects via
+ As currently set up in Ubuntu 16.04, when an audio device connects via
bluetooth, it starts being used by programs automatically. However, the
sound applet still "points to" the previously selected audio output.
Therefore, changing the volume has no immediate audible effect.
The way to change that, currently, is to go to Sound settings, select
the bluetooth device as current output (again?), and then the volume
will change.
I would expect that, when a bluetooth device is connected, it starts
being used *and* changing the volume immediately will affect the
bluetooth device.
I googled a bit, and people have suggested [1] that the file
/etc/pulse/default.pa should contain load-module module-switch-on-
connect before the volume is restored. My installation does not have
that line, but it does have:
### Should be after module-*-restore but before module-*-detect
load-module module-switch-on-port-available
According to [1], this should be listed in that file *before* the
aforementioned module-*-restore lines.
[1] https://askubuntu.com/questions/233277/when-a-bluetooth-audio-
device-auto-connects-volume-settings-wont-work-until-i-m
** Description changed:
As currently set up in Ubuntu 16.04, when an audio device connects via
bluetooth, it starts being used by programs automatically. However, the
sound applet still "points to" the previously selected audio output.
Therefore, changing the volume has no immediate audible effect.
The way to change that, currently, is to go to Sound settings, select
the bluetooth device as current output (again?), and then the volume
will change.
I would expect that, when a bluetooth device is connected, it starts
- being used *and* changing the volume immediately will affect the
+ being used, *and* changing the volume immediately will affect the
bluetooth device.
I googled a bit, and people have suggested [1] that the file
/etc/pulse/default.pa should contain load-module module-switch-on-
connect before the volume is restored. My installation does not have
that line, but it does have:
### Should be after module-*-restore but before module-*-detect
load-module module-switch-on-port-available
According to [1], this should be listed in that file *before* the
aforementioned module-*-restore lines.
[1] https://askubuntu.com/questions/233277/when-a-bluetooth-audio-
device-auto-connects-volume-settings-wont-work-until-i-m
** Description changed:
As currently set up in Ubuntu 16.04, when an audio device connects via
bluetooth, it starts being used by programs automatically. However, the
sound applet still "points to" the previously selected audio output.
Therefore, changing the volume has no immediate audible effect.
The way to change that, currently, is to go to Sound settings, select
the bluetooth device as current output (again?), and then the volume
will change.
I would expect that, when a bluetooth device is connected, it starts
being used, *and* changing the volume immediately will affect the
bluetooth device.
I googled a bit, and people have suggested [1] that the file
/etc/pulse/default.pa should contain load-module module-switch-on-
connect before the volume is restored. My installation does not have
that line, but it does have:
### Should be after module-*-restore but before module-*-detect
load-module module-switch-on-port-available
- According to [1], this should be listed in that file *before* the
+ According to [1], maybe this should be listed in that file *before* the
aforementioned module-*-restore lines.
[1] https://askubuntu.com/questions/233277/when-a-bluetooth-audio-
device-auto-connects-volume-settings-wont-work-until-i-m
--
You received this bug notification because you are a member of
Debian/Ubuntu Games Team, which is subscribed to openal-soft in Ubuntu.
https://bugs.launchpad.net/bugs/1738528
Title:
Sound applet reflects volume of different device when bluetooth device
auto-connects
Status in pulseaudio package in Ubuntu:
New
Bug description:
As currently set up in Ubuntu 16.04, when an audio device connects via
bluetooth, it starts being used by programs automatically. However,
the sound applet still "points to" the previously selected audio
output. Therefore, changing the volume has no immediate audible
effect.
The way to change that, currently, is to go to Sound settings, select
the bluetooth device as current output (again?), and then the volume
will change.
I would expect that, when a bluetooth device is connected, it starts
being used, *and* changing the volume immediately will affect the
bluetooth device.
I googled a bit, and people have suggested [1] that the file
/etc/pulse/default.pa should contain load-module module-switch-on-
connect before the volume is restored. My installation does not have
that line, but it does have:
### Should be after module-*-restore but before module-*-detect
load-module module-switch-on-port-available
According to [1], maybe this should be listed in that file *before*
the aforementioned module-*-restore lines.
[1] https://askubuntu.com/questions/233277/when-a-bluetooth-audio-
device-auto-connects-volume-settings-wont-work-until-i-m
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1738528/+subscriptions